Incoloy 825 Plate, Alloy UNS N08825 Sheet Supplier In Mumbai, India

Incoloy Alloy 825 Plate is made up of a nickel iron chromium alloy that has copper, titanium and molybdenum in the composition. The composition makes the Incoloy 825 Plate resistant to most corrosive environments and applications. Stancor Alloys is a leading manufacturer and supplier of these Incoloy 825 Sheet products in various standards, specifications and sizes. The material is resistant to oxidizing and reducing media. It has good stress corrosion cracking resistant and to localized pitting and crevice corrosion attacks. The Incoloy Alloy 825 Sheet is very much resistant to sulfuric acid and phosphoric acids. So it could be used in the production of sulfuric and phosphoric acids. It has good machinability and it could be used in pressure vessel components as well.

The Cold Rolled Alloy 825 Plate applications include chemical processing, pollution control, oil and gas wells, acid production, pickling equipment and in nuclear fuel processing. The ASME SB 424 UNS N08825 Incoloy 825 Coil has high temperature resistance and high strength. The minimum yield strength is at 30ksi and the minimum tensile strength is at 85ksi. The combination of the strength and the heat resistance is useful in high heat applications where stronger components are needed. The ASTM B424 UNS N08825 Strip is a variation of the plates and it could be used to manufacture pipes. Please contact us for any of your custom orders in the incoloy 825 plate products.

Incoloy 825 Plate Specification And Grade

Grade INCOLOY 825 (42 Ni/22 Cr/3 Mo) - ASTM B424 UNS N08825, ASME SB424, MSRR, AMS, BS
Thickness 0.3 to 1200 mm or as required
Type Clad Plate, Rolling Plate, Flat Shim, Plain Sheet, Rolling Sheet Rolls, Foils, Coils, Plate, Strip, Sheet, Flats, Blank (Circle), ,Flat Sheet, Shim Sheet, soft annealed, descaled, sheared, annealed, Checker Plate, tread plate
Width 0-2500mm or as required
Surface Hot rolled plate (HR), Cold rolled sheet (CR), No.1 finish hot rolled ASTM B424 Alloy 825 Plate, BA, No.3, No.4, No.6, No.1, No. 2D, No. 2B, BA NO(8), No.7, 2B, 2D, SATIN (Met with Plastic Coated), 2B, 1D, No.4, 8K, BA, hairline, brush, satin, mirror etc.
Process Hot/ Cold Rolled
Length 0-12mm or as required

Incoloy 825 Coil Density

Density
  • lb/in3 : 0.294
  • Mg/m3 : 8.14

Check Incoloy 825 Plates Chemical Composition, Incoloy Alloy 825 Hot Rolled (HR) Sheet Mechanical properties, 2.4858 Incoloy 825 Coil Physical Properties.

Incoloy 825 Alloy Strip Melting Range

Melting range
  • °F : 2500-2550
  • °C :1370-1400

2.4858 Alloy 825 Plate Size Schedule

Stocked Sizes

Size in inches Size in mm
.125 3.18
.134 3.40
.156 3.96
.187 4.75
.250 6.35
.312 7.92
.375 9.53
.500 12.7
.625 15.9
.750 19.1
.875 22.2
1 25.4
1.125 28.6
1.250 31.8
1.500 38.1
1.750 44.5
2 50.8
2.500 63.5
3 76.2

We provide Multiple Payment Options Of Incoloy 825 Cold Rolled (CR) Sheet, Contact US Today to Buy ASME SB 424 Incoloy 825 Sheet Stockist In India, Manufacturers Of Incoloy 825 Circles In India.

Basic Types Of Incoloy Alloy 825 Plate

Incoloy 825 Sheet Incoloy 825 Sheet
Alloy 825 Sheet Alloy 825 Sheet
Incoloy 825 Plates Incoloy 825 Plates
2.4858 Incoloy 825 Coil 2.4858 Incoloy 825 Coil
Incoloy 825 Cold Rolled (CR) Sheet Incoloy 825 Cold Rolled (CR) Sheet
ASME SB 424 Incoloy 825 Sheet ASME SB 424 Incoloy 825 Sheet
Incoloy 825 Circles Incoloy 825 Circles
Nickel Alloy 825 Sheet Nickel Alloy 825 Sheet
Incoloy 825 Perforated Sheets Incoloy 825 Perforated Sheets
Incoloy Alloy 825 Shim Sheets Incoloy Alloy 825 Shim Sheets
Incoloy 825 Coils Incoloy 825 Coils
Incoloy UNS N08825 Plates Incoloy UNS N08825 Plates

Incoloy 825 Sheet Weight Chart

Thickness (inches) Plate Weight per Unit Area Density
3/16 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³
Accept all small/ Large Orders ASTM B424 Incoloy 825 Sheet, Weight Chart Of Nickel Alloy 825 Sheet, View Incoloy 825 Perforated Sheets Grades Equivalent.

SB424 Alloy 825 Polished Plate Imperial Dimensions

Plate Surface finish Width (max in) Gauge (in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 72* 10–24
2D – Cold rolled, heat treated, pickled plate 60 12–24
BA Mexinox only 48 18–28
Polished plate (not brushed) 60 11–24
Temper rolled plate Mexinox only 48 13–29

Incoloy Alloy 825 Plate Metric Dimensions

Plate Surface finish Width (max mm) Thickness (mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 2032 0.25–8.0
2D – Cold rolled, heat treated, pickled plate 1524 0.4–6.35
2E – Cold rolled, heat treated, mechanically descaled plate 2032 0.4–8.0
2R – Cold rolled, bright annealed plate 1524 0.25–3.5
2H – Work hardened plate 1524 0.4–6.35
Polished, brushed plate 1524 0.5–4.0

Alloy 825 Nickel Cold Rolled Plate Stock List

Alloy Product form Dimension
42 Ni/22 Cr/3 Mo Strip; cold rolled, hard 0.40x5 mm x coil, 0.016 kg/m
42 Ni/22 Cr/3 Mo Strip; cold rolled, hard rolled, special temper 0.40x25 mm x coil, 0.007 kg/m
42 Ni/22 Cr/3 Mo Strip; cold rolled, hard 0.50x5 mm x coil, 0.02 kg/m
42 Ni/22 Cr/3 Mo Strip; cold rolled, bright anneal, clean spool 0.60x5 mm x spool, 0.02 kg/m
42 Ni/22 Cr/3 Mo Strip; cold rolled, hard rolled, special temper 0.60x25 mm x coil, 0.011 kg/m
42 Ni/22 Cr/3 Mo Sheet; cold rolled, annealed 0.5x914.4 mm x coil, 3.587 kg/m
42 Ni/22 Cr/3 Mo Sheet; cold rolled, annealed 0.6x1219 mm x coil, 5.95 kg/m
42 Ni/22 Cr/3 Mo Sheet; cold rolled, annealed, bellows quality 0.7x1219 mm x coil, 6.70 kg/m
42 Ni /22Cr/3 Mo Sheet; cold rolled, annealed 0.8x1220 mm x coil, 7.76 kg/m
42 Ni/22 Cr/3 Mo Sheet; cold rolled, annealed 1.0x1219 mm x coil, 9.5 kg/m
42 Ni/22 Cr/3 Mo Sheet; cold rolled, pickled, annealed 1.6x1200x3000 mm, 46.4 kg/pc
42 Ni/22 Cr/3 Mo Sheet; cold rolled, pickled, annealed 2.0x1200x3000 mm, 60.15 kg/pc
42 Ni/22 Cr/3 Mo Sheet; cold rolled, soft annealed,descaled, sheared 3.0x1200x3000 mm, 88.5 kg/pc
42 Ni/22 Cr/3 Mo Plate; hot rolled, soft annealed, descaled, sheared 4.0x2440x6000 mm, 482 kg/pc
42 Ni/22 Cr/3 Mo Plate; hot rolled, descaled, annealed 5.0x2000x6000 mm, 539 kg/pc
42 Ni/22 Cr/3 Mo Strip; cold rolled, hard 1.0x5 mm x coil, 0.039 kg/m
42 Ni/22 Cr/3 Mo Plate; hot rolled, descaled, annealed 18.0x260x260 mm, 9.9 kg/pc
Stockist Of Incoloy Alloy 825 Shim Sheets, Check Update Price before you buy Incoloy 825 Coils, Incoloy UNS N08825 Plates Manufacturers In India.

Nickel Alloy 825 Sheet Chemical Composition Standard

Grade C Mn Si S Cu Fe Ni Cr Al Ti
825 0.05 1.00 0.5 0.03 1.50 – 3.00 22.00 38.00 – 46.00 19.50 – 23.50 0.02 0.06 – 1.20

ASTM B424 825 Incoloy strip Mechanical Properties Analysis

Element Tensile Strength Density Yield Strength (0.2%Offset) Melting Point Elongation
825 Psi – 80,000 , MPa – 550 8.14 g/cm3 Psi – 32,000 , MPa – 220 1400 °C (2550 °F) 30 %

Equivalent Grades Of Alloy 825 Sheet

STANDARD BS WERKSTOFF NR. GOST UNS EN JIS AFNOR OR
Incoloy 825 NA 16 2.4858 ЭП703 N08825 NiCr21Mo NCF 825 NFE30C20DUM XH38BT

ASTM B424 Alloy 825 Plate Uses

  • Hot vessels for food, water, and seawater
  • Pickling tank heaters, tanks, and equipment
  • Nuclear fuel reprocessing
  • Radioactive waste handling
  • Oil and gas recovery
  • Marine exhaust systems
  • Acid production
  • Pollution control
  • Calorifiers
  • Chemical processing

AMS 5542 Alloy 825 Nickel Sheet Features

  • Very resistant to sulfuric and phosphoric acids
  • Good resistance to stress-corrosion cracking
  • Satisfactory resistance to localized attack like pitting and crevice corrosion
  • Excellent resistance to reducing and oxidizing acids
  • Permission for pressure-vessel use at wall temperatures up to 800°F
  • Good mechanical properties at both room and elevated temperatures up to approximately 1000°F