PED Certified ASTM B168 Alloy 601 Plates, UNS N06601 Sheet Supplier in Mumbai, India

Inconel Alloy 601 Plates is made up of a heat resistant nickel chromium alloy. The plates could be solid solution annealed and they can perform up to 1200 degrees Celsius temperature. Stancor Alloys is a leading manufacturer and supplier of the Inconel 601 Sheet and Nickel Alloy 2.4816 Shee t products. These are resistant to aqueous corrosion and can perform well in high temperatures and high corrosion environments. The Inconel 601 Plates is made up of a material that has above 58% nickel, 21% chromium and iron, aluminum, carbon, manganese, silicon, sulfur and copper in the composition. This specific composition makes the ASME SB 168 Inconel 601 Sheet, Inconel 601 Plate stronger and be used in high stress applications as well. The application of Inconel 601 Circles can also be seen in high temperature services. The material has 205MPa minimum yield strength and 550MPa minimum tensile strength as well.

There are different types and finishes of these sheets. The finishes could be Inconel 601 Perforated Sheets, coated sheets and galvanized. Typical applications include thermocouple protection, process heaters, condenser components, catalyst support systems and acid manufacturing. The Inconel Alloy 601 Shim Sheets are also used in the same capacity in connecting two components together. The acid resistance of the material makes it applicable in nitric acid production plants. The Cold Rolled ASTM B168 Alloy 601 Plates has good ductility and toughness as well. So the plates could be used in manufacturing pipes as well. The Inconel 601 UNS N06601 Strip is used in narrow space applications as well as in manufacturing pipes and tubes by welding them together. The high temperature resistance and the thermal conductivity of Alloy Inconel 601 Coils allow them to be used in heat exchangers, super heaters and in condenser components. Please contact us for more product information and pricing.

Inconel 601 Plate Specifications, Sizes And Schedules

Type Clad Plate, Rolling Plate, Flat Shim, Plain Sheet, Rolling Sheet Rolls, Foils, Coils, Plate, Strip, Sheet, Flats, Blank (Circle), ,Flat Sheet, Shim Sheet, soft annealed, descaled, sheared, annealed, Checker Plate, tread plate
Thickness 0.3 to 1200 mm or as required
Surface Hot rolled plate (HR), Cold rolled sheet (CR), No.1 finish hot rolled ASTM B168 Alloy 601 Plate, BA, No.3, No.4, No.6, No.1, No. 2D, No. 2B, BA NO(8), No.7, 2B, 2D, SATIN (Met with Plastic Coated), 2B, 1D, No.4, 8K, BA, hairline, brush, satin, mirror etc.
Width 0-2500mm or as required
Length 0-12mm or as required
Process Hot/ Cold Rolled
ASTM B168 Alloy 601 Plate, Sheet and Strip
ASTM B168 UNS N06601, ASME SB168

Inconel 601 Plate, Sheet and Strip - EN 10095, MIL-DTL-23228, ISO 6208, BS 3072NA14 and 3073NA14, ASTM B 906/ASME SB 906, ASTM B 168/ASME SB 168, SAE/AMS 5540, ASME Code Cases 1827 and N-253, DIN 17750

Inconel 601 Plate standards and approvals
  • ASTM A 480
  • ISO 15510
  • EN ISO 18286
  • EN 10088-1
  • EN 10051
  • ASTM A 959
  • EN ISO 9445
  • ASME IID
Tolerances of width and thickness
  • EN 10151 ASTM B168 Alloy 601 strip for springs
  • EN 10258 (formerly DIN 59381)
  • EN 10088 ASTM B168 Alloy 601 strip (general)
UNS N06601 Plate Hardness Half Hard, Soft, Spring Hard, Quarter Hard, Hard ASTM B168 Alloy 601 Sheet suppliers
Availability of ASTM B168 Alloy 601 Foil sizes
  • Width: Up to 500 mm (19.5 in)
  • Thickness : 8-100 microns (0.00031-0.004 in)
  • Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns.
Standard ASTM B168 Alloy 601 Plate & Sheet Sizes

1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm

  • Hot rolled 601 Inconel Plate 3.0–10.0 mm
  • Cold rolled 601 Inconel Plate 0.5-6.4 mm
Plasma profiles As per customer's drawings
Profiling

To provide a full profiling service in India we use numerous profiling methods including:

  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting
  • Laser Plate Cutting
Value added services for ASTM B168 Alloy 601 Coil
  • Blanking
  • Slitting
  • Cut-to-length
  • Polishing
Manufacturer & exporter of
  • Alloy Inconel 601 Clad plate: Alloy Inconel 601 Clad plate is a composite steel plate made by bonding UNS N06601 Inconel 601 plate, etc.
  • 601 Inconel Sheet: material under 3/16" [5.00 mm] in thickness and 24" [601 mm] and over in width;
  • ASTM B168 Alloy 601 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width;
  • ASTM B168 Alloy 601 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [601 mm] in width.
Value added services for ASTM B168 Alloy 601 Plate Waterjet cutting, Laser cutting, Bending and mechanical processing, Plasma cutting, welding, edge preparation, sawing and shearing.
Inconel 601 Plate Origin European Origin, Indian Origin, Japanese Origin
Test SGS testing, UT, TUV etc
Why buy ASTM B168 Alloy 601 Plate from Metal Tube Industries?
  • Mill Test Certificate is supplied with shipment.
  • Free sample
  • EN 10204 3.1
  • Minimum Nitrogen content and Ferrite Count Test
  • Free quote
  • NABL Approved Lab Reports
  • Tested to ASTM A923 Method "C" or ASTM G48 Method "A".
  • Any third party inspection is accepted.
Packing of Inconel 601 Plate Bundles with waterproof cloth outside or plywood box

ASME SB 168 Inconel 601 Sheet Density

UNS N06601 Inconel 601 Plate density
8.1 g/cm cube

Inconel Alloy 601 Plate Size Range, Check Alloy 601 Sheet Chemical Composition, Inconel Alloy 601 Hot Rolled (HR) Sheet Mechanical properties, Call Now to Get Inconel 601 Cold Rolled (CR) Sheet Free sample.

Specific Heat
461 J/kg K

Inconel 601 Cold Rolled (CR) Sheet Melting Range

ASTM B168 Alloy 601 Plate melting range
1320 - 1370 C

Alloy Inconel 601 Foil Size chart

Stocked Sizes
Size (in inches) Size (in mm)
.125" 3.18
.134" 3.40
.156" 3.96
.187" 4.75
.250" 6.35
.312" 7.92
.375" 9.53
.500" 12.7
.601" 15.9
.750" 19.1
.875" 22.2
1" 25.4
1.125" 28.6
1.250" 31.8
1.500" 38.1
1.750" 44.5
2" 50.8
2.500" 63.5
3" 76.2

High quality Inconel 601 Plate Suppliers, Check ASTM B168 Inconel 601 Alloy Sheet Size Chart, 2.4851 Inconel 601 Clad Plate, 601 Inconel Coil stockist in India

Inconel 601 Sheet Weight Chart

16 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

Different Inconel Alloy 601 Plate Types

Inconel 601 Sheet Inconel 601 Sheet
Alloy 601 Sheet Alloy 601 Sheet
Inconel Alloy 601 Hot Rolled (HR) Sheet Inconel Alloy 601 Hot Rolled (HR) Sheet
Inconel 601 Cold Rolled (CR) Sheet Inconel 601 Cold Rolled (CR) Sheet
ASME SB 168 Inconel 601 Sheet ASME SB 168 Inconel 601 Sheet
Inconel 601 Circles Inconel 601 Circles
Inconel 601 Perforated Sheets Inconel 601 Perforated Sheets
Inconel Alloy 601 Shim Sheets Inconel Alloy 601 Shim Sheets
ASTM B168 Inconel 601 Sheet ASTM B168 Inconel 601 Sheet
Inconel 601 Coils Inconel 601 Coils
Inconel 601 UNS N06601 Strip Inconel 601 UNS N06601 Strip
Alloy Inconel 601 Foil Alloy Inconel 601 Foil

Inconel 601 Perforated Sheets Imperial Dimensions

Plate Surface finish Width (max in) Gauge (in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 72* 10–24
2D – Cold rolled, heat treated, pickled plate 60 12–24
BA Mexinox only 48 18–28
Polished plate (not brushed) 60 11–24
Temper rolled plate Mexinox only 48 13–29
We Maintain ASME SB 168 Inconel 601 Sheet Good Quality, Inconel 601 Circles Suppliers In Mumbai, India, Check Availability Of Inconel 601 Perforated Sheets, Get Free Quote Of Inconel Alloy 601 Shim Sheets.

2.4851 Inconel 601 Clad Plate Metric Dimensions

Plate Surface finish Width (max mm) Thickness (mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 2032 0.25–8.0
2D – Cold rolled, heat treated, pickled plate 1524 0.4–6.35
2E – Cold rolled, heat treated, mechanically descaled plate 2032 0.4–8.0
2R – Cold rolled, bright annealed plate 1524 0.25–3.5
2H – Work hardened plate 1524 0.4–6.35
Polished, brushed plate 1524 0.5–4.0

Alloy 601 Sheet Stock List

Alloy Product form Dimension
61Ni/23Cr/1.5Al Sheet; cold rolled, solution annealed 0.5x1000 mm x coil, 4 kg/m
61Ni/23Cr/1.5Al Sheet; cold rolled, solution annealed 1.0x1200 mm x coil, 9.7 kg/m
61Ni/23Cr/1.5Al Sheet; cold rolled, sol. annealed 2.0x1200x3000 mm, 59.1 kg/pc
61Ni/23Cr/1.5Al Sheet; cold rolled, pickled, solution annealed 3.0x1200x3000 mm, 87.3 kg/pc
61Ni/23Cr/1.5Al Sheet; hot rolled, sol annealed, descaled, sheared 4.0x1200x3000 mm, 116 kg/pc
61Ni/23Cr/1.5Al Plate; hot rolled 5.0x1200x3000 mm, 152 kg/pc
61Ni/23Cr/1.5Al Plate; hot rolled, sol. annealed, descaled, sheared 6.0x2200x3100 mm, 330 kg/pc

Inconel Alloy 601 Shim Sheets Composition Standard

Grade Cu C Fe Mn Ni Si S Cr
Inconel 601 1.00 0.10 Balance 1.00 58.0 – 63.0 0.50 0.015 21.0 – 25.0
Physical Properties Of ASTM B168 Inconel 601 Sheet, Inconel 601 Coils Grades Equivalent, Get instant delivery of Inconel 601 UNS N06601 Strip In India.

601 Inconel Coil Mechanical Behaviour

Element Tensile Strength Density Yield Strength Melting Point Elongational
Inconel 601 Psi – 80,000 , MPa – 550 8.1 g/cm3 Psi – 30,000 , MPa – 205 1411 °C (2571 °F) 30 %

Equivalent Of DIN 17750 2D Plate

STANDARD BS WERKSTOFF NR. GOST UNS AFNOR JIS EN
Inconel 601 NA 49 2.4851 XH60BT N06601 NC23FeA NCF 601 NiCr23Fe

Difference between Inconel 601 Plate, Sheet, & Foil

  • Thickness greater than 0.15 mm and less than 6.35mm is called a Inconel 601 Sheet.
  • Thickness greater than 6.35 mm is called a Inconel 601 Plate.
  • Thickness less than 0.15mm is called a Inconel 601 Foil.

Inconel Alloy 601 Plate Stock List

Alloy Product form Dimension
INCONEL 601 (61Ni/23Cr/1.5Al) Sheet; cold rolled, solution annealed 0.5x1000 mm x coil, 4 kg/m
INCONEL 601 (61Ni/23Cr/1.5Al) Sheet; cold rolled, solution annealed 1.0x1200 mm x coil, 9.7 kg/m
INCONEL 601 (61Ni/23Cr/1.5Al) Sheet; cold rolled, sol. annealed 2.0x1200x3000 mm, 59.1 kg/pc
INCONEL 601 (61Ni/23Cr/1.5Al) Sheet; cold rolled, pickled, solution annealed 3.0x1200x3000 mm, 87.3 kg/pc
INCONEL 601 (61Ni/23Cr/1.5Al) Sheet; hot rolled, sol annealed, descaled, sheared 4.0x1200x3000 mm, 116 kg/pc
INCONEL 601 (61Ni/23Cr/1.5Al) Plate; hot rolled 5.0x1200x3000 mm, 152 kg/pc
INCONEL 601 (61Ni/23Cr/1.5Al) Plate; hot rolled, sol. annealed, descaled, sheared 6.0x2200x3100 mm, 330 kg/pc

ASTM B168 Inconel 601 Alloy Sheet Uses

  • Heat treating muffles and retorts
  • Aerospace
  • Radiant tubes
  • Catalyst support grids in nitric acid production
  • Chemical Processing
  • Power generation
  • Steam superheater tube supports
  • Heat treating industry

Inconel 601 UNS N06601 Strip Features

  • Metallurgical stability
  • Highly resistant to carburization
  • Outstanding oxidation resistance to 2200° F
  • Good creep rupture strength
  • Resists spalling even under severe thermal cycling conditions