Fastest Growing Supplier Of MS Plate, Is 2062 Mild Steel Sheet

Mild Steels Plate is a metallic plate made up of any low carbon content steels material. They are also called low carbon steels plates. Depending on the carbon content, the material could be graded differently. And there are grades and specifications such as the Is 2062 Mild Steel Plates. Stancor Alloys is a leading distributor of mild carbon steels plates in different grades and capacities such as the Mild Steel Is 2062 Plates and others. The mild carbon steels plates are not made up of alloys. So there are usually little to very less alloying elements in low carbon or Ms Plates. The low carbon chemical composition provides the materials with very high ductility and toughness. Due to the low carbon content in the Hot Rolled Mild Steel Plates they are also highly machinable and weldable.

The welding procedures and forming procedures on the Mild Steel Hot Rolled Plate is much easier than on the high carbon counterparts of the same grades of stainless steels materials. Since the toughness is high, these mild carbon steels are hard to heat treat or quench. The Mild Steel Checker Plate is one of the finishes that can be obtained in this range of steels plates. There are different types of finishes which are useful in different applications. The Mild Steel Perforated Sheet is used to reduce the weight and yet to have similar strength. It is also useful in aeration systems and permeable walls to permit gases and liquids to pass through but yet to have the structure intact. The Mild Steel Cold Rolled Sheet, MS Plate is used as structural steels components, sign boards, automobile applications, furniture, decorations and in other applications. Please contact us for more information and pricing of the Cold Rolled Mild Steels Sheet varieties.

Hot Rolled Mild Steel Plates Specification

Thickness 5 milimeter-150 milimeter
Pattern Plain
Width 1000 milimeter - 4500 milimeter
Surface Treatment Cold Rolled, Hot Rolled
Length 3000 milimeter - 18000 milimeter
Type Steel Plate, Steel Coil
Process Hot-Rolled (HR)

Fastest Growing Supplier Of Mild Steel Is 2062 Plates, Stockist In India, Get at discount of Ms Plates, Hot Rolled Mild Steel Plates Distributor In India.

Mild Steels Composition

Element Content
Carbon, C 0.14 – 0.20 %
Iron, Fe 98.81 – 99.26 % (as remainder)
Manganese, Mn 0.60 – 0.90 %
Phosphorous, P ≤ 0.040 %
Sulfur, S ≤ 0.050 %

Hot Rolled MS Plates Mechanical Properties

Mechanical Properties Metric Imperial
Hardness, Brinell 126 126
Hardness, Knoop (Converted from Brinell hardness) 145 145
Hardness, Rockwell B (Converted from Brinell hardness) 71 71
Hardness, Vickers (Converted from Brinell hardness) 131 131
Tensile Strength, Ultimate 440 MPa 63800 psi
Tensile Strength, Yield 370 MPa 53700 psi
Elongation at Break (In 50 mm) 15.0 % 15.0 %
Reduction of Area 40.0 % 40.0 %
Modulus of Elasticity (Typical for steel) 205 GPa 29700 ksi
Bulk Modulus (Typical for steel) 140 GPa 20300 ksi
Poissons Ratio (Typical For Steel) 0.290 0.290
Machinability (Based on AISI 1212 steel. as 100% machinability) 70 % 70 %
Shear Modulus (Typical for steel) 80.0 GPa 11600 ksi

Mild Steels Is 2062 Plates Physical Properties

Physical Properties Metric Imperial
Density 7.87 g/cc 0.284 lb/in3

Types of Mild Steel Plate

Buy Hr Mild Steels Plates Certified & Tested Materials, We provide Multiple Payment Options Of Mild Steels Hot Rolled Plate, Properties Of Mild Steels Checker Plate.

Is 2062 Mild Steel Plates Is 2062 Mild Steel Plates
Mild Steel Is 2062 Plates Mild Steel Is 2062 Plates
Ms Plates Ms Plates
Hot Rolled Mild Steel Plates Hot Rolled Mild Steel Plates
Hr Mild Steel Plates Hr Mild Steel Plates
Mild Steel Hot Rolled Plate Mild Steel Hot Rolled Plate
Mild Steel Checker Plate Mild Steel Checker Plate
Mild Steel Chequered Plate Mild Steel Chequered Plate
Mild Steel Perforated Sheet Mild Steel Perforated Sheet
Mild Steel Cold Rolled Sheet Mild Steel Cold Rolled Sheet
Mild Steel 6mm Sheet Mild Steel 6mm Sheet
Cold Rolled Mild Steel Sheet Cold Rolled Mild Steel Sheet

Application of MS Plates

Buy Mild Steel Chequered Plate Fast Delivery, We provide Mild Steels Plate In-House Cutting, Check the Market price before you buy Mild Steel Perforated Sheet, Mild Steels Cold Rolled Sheet Distributor In India.
  • Furniture
  • Engineering
  • Automotive
  • Decorations
  • Automobiles
  • Cars and Wire
  • Agricultural sectors
  • Fencing and Nails

Hr Mild Steel Plates Thickness

Length x Width Thickness Mass per Sq m Length x Width Thickness Mass per Sq m
mm mm Kg/m2 mm mm Kg/m2
2000 x 1000 3 23.55 2000 x 1000 30.00 235.50
2500 x 1250 3 23.55 2500 x 1250 30.00 235.50
3000 x 1500 3 23.55 3000 x 1500 30.00 235.50
3660 x 1830 3 23.55 4000 x 2000 30.00 235.50
4000 x 2000 3 23.55 5000 x 1250 30.00 235.50
2000 x 1000 4 31.40 5000 x 2500 30.00 235.50
2500 x 1250 4 31.40 6000 x 2500 30.00 235.50
3000 x 1500 4 31.40 10000 x 2500 30.00 235.50
3660 x 1830 4 31.40 2000 x 1000 32.00 251.20
2000 x 1000 5 39.25 2500 x 1250 32.00 251.20
2500 x 1250 5 39.25 3000 x 1500 32.00 251.20
3000 x 1500 5 39.25 4000 x 2000 32.00 251.20
3660 x 1830 5 39.25 5000 x 2500 32.00 251.20
4000 x 1750 5 39.25 2500 x 1250 35.00 274.75
4000 x 1830 5 39.25 3000 x 1500 35.00 274.75
4000 x 2000 5 39.25 4000 x 2000 35.00 274.75
6000 x 2000 5 39.25 2000 x 1000 40.00 314.00
2500 x 1250 6 47.10 2500 x 1250 40.00 314.00
3000 x 1500 6 47.10 3000 x 1500 40.00 314.00
3000 x 1525 6 47.10 4000 x 1750 40.00 314.00
3660 x 1830 6 47.10 4000 x 2000 40.00 314.00
4000 x 1750 6 47.10 5000 x 2500 40.00 314.00
4000 x 1830 6 47.10 6000 x 2000 40.00 314.00
4000 x 2000 6 47.10 7500 x 2500 40.00 314.00
6000 x 1500 6 47.10 2000 x 1000 45.00 353.25
6000 x 1830 6 47.10 2500 x 1250 45.00 353.25
6000 x 2000 6 47.10 2500 x 1500 45.00 353.25
6000 x 2500 6 47.10 3000 x 1500 45.00 353.25
8000 x 2000 6 47.10 4000 x 2000 45.00 353.25
8000 x 2500 6 47.10 5000 x 2500 45.00 353.25
2000 x 1000 8 62.80 2000 x 1000 50.00 392.50
2500 x 1250 8 62.80 2500 x 1250 50.00 392.50
3000 x 1500 8 62.80 3000 x 1500 50.00 392.50
3660 x 1830 8 62.80 4000 x 2000 50.00 392.50
4000 x 2000 8 62.80 5000 x 2500 50.00 392.50
5000 x 2500 8 62.80 6000 x 2000 50.00 392.50
6000 x 1500 8 62.80 8000 x 2500 50.00 392.50
6000 x 2000 8 62.80 2000 x 1000 60.00 471.00
8000 x 2000 8 62.80 2500 x 1250 60.00 471.00
2000 x 1000 10 78.50 3000 x 1500 60.00 471.00
2500 x 1250 10 78.50 4000 x 2000 60.00 471.00
3000 x 1500 10 78.50 5000 x 2500 60.00 471.00
4000 x 1750 10 78.50 2000 x 1000 65.00 510.25
5000 x 2500 10 78.50 2500 x 1250 65.00 510.25
6000 x 1500 10 78.50 3000 x 1500 65.00 510.25
6000 x 2000 10 78.50 4000 x 2000 65.00 510.25
6000 x 2500 10 78.50 5000 x 2500 65.00 510.25
10000 x 2000 10 78.50 2000 x 1000 70.00 549.5
10000 x 2500 10 78.50 2500 x 1250 70.00 549.5
2000 x 1000 12 94.20 3000 x 1500 70.00 549.5
4000 x 2000 12 94.20 4000 x 2000 70.00 549.5
6000 x 2000 12 94.20 5000 x 2500 70.00 549.5
6000 x 2500 12 94.20 2000 x 1000 75.00 588.75
2000 x 1000 12.5 98.13 2500 x 1250 75.00 588.75
2500 x 1250 12.5 98.13 3000 x 1500 75.00 588.75
3000 x 1500 12.5 98.13 4000 x 2000 75.00 588.75
3050 x 1525 12.5 98.13 5000 x 2500 75.00 588.75
4000 x 1750 12.5 98.13 2000 x 1000 80.00 628.00
4000 x 2000 12.5 98.13 2500 x 1250 80.00 628.00
5000 x 2500 12.5 98.13 3000 x 1500 80.00 628.00
6000 x 1500 12.5 98.13 4000 x 2000 80.00 628.00
6000 x 2000 12.5 98.13 2000 x 1000 90.00 706.5
6000 x 2500 12.5 98.13 2500 x 1250 90.00 706.5
2000 x 1000 15 117.75 3000 x 1500 90.00 706.5
2500 x 1250 15 117.75 4000 x 2000 90.00 706.5
3000 x 1500 15 117.75 5000 x 2000 90.00 706.5
4000 x 1750 15 117.75 2000 x 1000 100.00 785.00
4000 x 2000 15 117.75 2500 x 1250 100.00 785.00
4000 x 2500 15 117.75 3000 x 1500 100.00 785.00
5000 x 2500 15 117.75 4000 x 2000 100.00 785.00
6000 x 2500 15 117.75 5000 x 2500 100.00 785.00
2500 x 1250 20 157.00 2000 x 1000 110.00 863.50
3000 x 1500 20 157.00 2500 x 1250 110.00 863.50
4000 x 2000 20 157.00 3000 x 1500 110.00 863.50
4000 x 2500 20 157.00 2000 x 1000 115.00 902.75
5000 x 2500 20 157.00 2500 x 1250 115.00 902.75
6000 x 2000 20 157.00 3000 x 1500 115.00 902.75
7500 x 2500 20 157.00 2000 x 1000 120.00 942.00
8000 x 2000 20 157.00 2500 x 1250 120.00 942.00
10000 x 3000 20 157.00 3000 x 1500 120.00 942.00
2000 x 1000 22.50 176.63 2000 x 1000 130.00 1020.50
2500 x 1250 22.50 176.63 2500 x 1250 130.00 1020.50
3000 x 1500 22.50 176.63 3000 x 1500 130.00 1020.50
4000 x 2000 22.50 176.63 4000 x 2000 130.00 1020.50
5000 x 2500 22.50 176.63 2000 x 1000 135.0 1059.75
2000 x 1000 25.00 196.25 2500 x 1250 135.0 1059.75
2500 x 1250 25.00 196.25 2000 x 1000 140.00 1099.00
3000 x 1500 25.00 196.25 2500 x 1250 140.00 1099.00
4000 x 2000 25.00 196.25 3000 x 1500 140.00 1099.00
5000 x 2500 25.00 196.25 2000 x 1000 150.00 1177.5
6000 x 2500 25.00 196.25 2500 x 1250 150.00 1177.5
6000 x 3000 25.00 196.25 3000 x 1500 150.00 1177.5
8000 x 2000 25.00 196.25
10000 x 2500 25.00 196.25

Features of MS Plates

Mild Steel 6mm Sheet Supplier In Mumbai, India, We Maintain Perforated Mild Steels Sheet Good Quality, Check Availability Of Cold Rolled Mild Steel Sheet, Get Free Quote Of Hot Rolled Mild Steel Sheet.
  • Durability
  • Corrosion resistant
  • High tensile strength

Range of Mild Steels Sheet

Sr. No. Material Size Thickness Specification
>1.

Mild Steel

1220 mm x 4880  mm
1500 mm x 6300  mm
2000 mm x 10000mm
2500 mm x 10000mm

>1 mm
To 150 mm
>IS 2062
>2.

GI

1220 mm x 2440 mm 1220 mm x 6000 mm
1500 mm x 6300 mm

>1 mm
To 20 mm
>DIN, BS, IS
EN Series

Mild Steels Chequered Plate Electrical Properties

Electrical Properties Metric English Comments
Electrical resistivity @0°C (32°F) 0.0000159 Ω-cm 0.0000159 Ω-cm annealed condition
@100 °C/ 212 °F 0.0000219 Ω-cm 0.0000219 Ω-cm annealed condition
@ 200 °C/392 °F 0.0000293 Ω-cm 0.0000293 Ω-cm annealed condition

MS Plates Size

S. No. Size Make
Thickness Width Length
1 2 1200 2500 Essar
2 2.5 1260 2500 Essar
3 2.9 1265 2500 Essar
4 3 1250 2500 Essar
5 4 1250 2500 Essar
6 5 1260 6300 Essar, SAIL
7 6 1250 6300 Essar, SAIL
8 8 1250 6300 Essar, SAIL
9 8 1500 6300 Essar, SAIL
10 10 1250 6300 SAIL
11 12 1250 6300 SAIL
12 16 1500 6300 SAIL
13 16 1250 6300 SAIL
14 16 2500 1250 SAIL
15 20 1500 6300 SAIL
16 25 2500 6000 SAIL
17 30 1000 5000 SAIL
18 32 2500 4800 SAIL
19 36 2580 4300 SAIL
20 40 2500 4200 SAIL
21 50 2130 3400 SAIL
22 5 1250 5000 SAIL
23 6 1250 5000 SAIL

Cold Reduced - Mild Steels Sheets - Grade EN 10130 : 1991 FePO1 (formerly BS1449-1 :1983/CR4)

Length x Width Thickness Mass per Sq m Length x Width Thickness Mass per Sq m
mm mm Kg / m2 mm mm Kg / m2
2000 x 1000 0.8 6.28 2000 x 1000 1.60 12.56
2500 x 1250 0.8 6.28 2500 x 1250 1.60 12.56
2000 x 1000 0.9 7.07 3000 x 1500 1.60 12.56
2500 x 1250 0.9 7.07 2000 x 1000 2.00 15.70
1830 x 1220 1.0 7.85 2500 x 1250 2.00 15.70
2000 x 1000 1.0 7.85 3000 x 1500 2.00 15.70
2440 x 1220 1.0 7.85 2000 x 1000 2.50 19.63
2000 x 1000 1.20 9.42 2440 x 1220 2.50 19.63
2500 x 1250 1.20 9.42 2500 x 1250 2.50 19.63
Mild Steel Sheets. Decoil to length available

Hot Rolled - MS Sheets - Grade BS1449 - S1.2 (1991) HR4 - Dry / P & O

Length x Width Thickness Mass per Sq m Length x Width Thickness Mass per Sq m
mm mm Kg/m2 mm mm Kg/m2
2000 x 1000 1.60 12.56 2000 x 1000 2.50 19.63
2500 x 1250 1.60 12.56 2500 x 1250 2.50 19.63
3000 x 1500 1.60 12.56 3000 x 1500 2.50 19.63
2000 x 1000 2.00 15.70 3660 x 1525 2.50 19.63
2500 x 1250 2.00 15.70 Mild steel sheets hot rolled HR4
3000 x 1500 2.00 15.70

Galvanised Sheet - Grade - BS EN 01042 : 1991 / FePO2G

Length x Width Thickness Mass per Sq m Length x Width Thickness Mass per Sq m
mm mm Kg/m2 mm mm Kg/m2
2000 X 1000 0.6 4.99 2000 X 1000 1.6 12.84
2500 X 1250 0.6 4.99 2500 X 1250 1.6 12.84
2000 X 1000 0.8 6.56 3000 X 1250 1.6 12.84
2500 X 1250 0.8 6.56 2000 X 1000 2.0 15.98
3000 X 1250 0.8 6.56 2500 X 1250 2.0 15.98
2000 X 1000 1.0 8.13 3000 X 1250 2.0 15.98
2500 X 1250 1.0 8.13 2000 X 1000 2.5 19.95
3000 X 1250 1.0 8.13 2500 X 1250 2.5 19.95
2000 X 1000 1.25 10.09 2000 X 1000 3.0 23.83
2500 X 1250 1.25 10.09 2500 X 1250 3.0 23.83
3000 X 1250 1.25 10.09
Also Corrugated Galv. Sheet

IS 2062 MS Sheet Heat Treatment

Normalizing 890°C – 940°C
Forging 900°C 
Tempering 150°C – 200°C
Annealing 870°C – 910°C
Stress Relieving 500°C – 700°C
Case Hardening 780°C – 820°C
Core Refining 880°C – 920°C
Carburizing 880°C – 920°C