Contact US For 316L Stainless Steel Sheets, AISI 316L Shim Sheet Instant Delivery.

Stainless Steel 316L Sheet is a low carbon version of the molybdenum added chromium nickel austenitic stainless steel. The addition of molybdenum to the composition makes the 304 material corrosion resistant than the 18/8 stainless steel. SS 316L Coils and other forms of the plates can withstand high chloride concentrations. They are resistant to pitting and crevice corrosion attacks. The Stainless Steel 316L Circle is another form of the plates and sheets that are used in different applications. The composition contains chromium and nickel in large quantities. The molybdenum content along with solid solution annealing provides the SUS 316L Plate with corrosion resistance against chloride ion rich solutions and high strength. The material has 205MPa minimum yield strength and 525MPa minimum tensile strength. The ASTM A240 Stainless Steel 316L Shim Sheets are specified for pressure vessel applications and general corrosion resistant applications. The material can perform under high temperatures.

The SS 316L Circle is used at operating temperatures up to 870 degrees Celsius for intermittent services. The material could be used up to 925 degrees Celsius for continuous services as well. The Stainless Steel 316L Cold Rolled Plates are drawn from the raw material at the room temperatures where the hot rolled sheets are drawn under elevated temperatures. There are different finishes available to the plates such as checkered and SS 316L Perforated Coils and plates. The perforation allows for less weight per surface area. There are other finishes such as the 316L Stainless Steel 2B Plate and coatings. The applications of the material include food processing, coastal, marine and sea water applications. The 316L SS Polished Plates are used in outdoor structures and in architectural designs. The polishing of the sheets provide with an aesthetic appeal to the application. Please feel free to contact us for any of your needs in 316L Stainless Steel Cold Rolled Plates or hot rolled plates.

SUS 316L Plate Standards And Specifications

Specifications ASTM A240 / ASME SA240
Length 2000 milimeter, 2440 milimeter, 3000 milimeter, 5800 milimeter, 6000 milimeter, etc
Thickness 4 milimeter - 100 milimeter
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Width
1000 milimeter, 1219 milimeter, 1500 milimeter, 1800 milimeter, 2000 milimeter, 2500 milimeter, 3000 milimeter, 3500 milimeter, etc
Form Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc

Check Attractive Price Offer On SS 316L Coils In India, Stainless Steel 316L Circle Specification, SUS 316L Plate Chemical Composition.

Stainless Steel 316H Sheets Chemical Composition Standard

Grade Cr C Mo Mn Ni S Si P N
SS 316L 16.00 – 18.00 0.035 2.00 – 3.00 2 10.00 – 14.00 0.030 1.00 0.045 68.89
SS 316H Min 16.0 0.04 2.00 0.04 10.0 0
Max 18.0 0.10 3.00 0.10 14.0 0.03 0.75 0.045

TP 316L Strips Mechanical Properties Analysis

View ASTM A240 Stainless Steel 316L Plate Sizes And TP 316L Strips Properties, SS 316L Circle Manufacturers In India, Get Stainless Steel 316L Cold Rolled Plates With Best Price & Fast Delivery.

Grade Tensile Strength Density Elongation Melting Point Hardness Yield Strength (0.2%Offset)
          Rockwell B (HR B) max Brinell (HB) max  
SS 316L Psi – 75000 , MPa – 515 8.0 g/cm3 35 % 1399 °C (2550 °F) - - Psi – 30000 , MPa – 205
SS 316H 515 - 40% - 95 217 205

Most Common Types Of Stainless Steel 316L Sheet

We Maintain SS 316L Perforated Coils Good Quality, 316L Stainless Steel 2B Plate Supplier In Mumbai, India, Check Availability Of 316L SS Polished Plates, Get Free Quote Of 316H SS Shim Sheets.
SUS 316L Plate SUS 316L Plate
SS 316L Coils SS 316L Coils
Stainless Steel 316L Circle Stainless Steel 316L Circle
Stainless Steel 316H Sheets Stainless Steel 316H Sheets
TP 316L Strips TP 316L Strips
Stainless Steel 316H Plate Stainless Steel 316H Plate
TP 316H Plate TP 316H Plate
Stainless Steel 316L Cold Rolled Plates Stainless Steel 316L Cold Rolled Plates
SS 316H Coils SS 316H Coils
SS 1.4401 Sheets SS 1.4401 Sheets
UNS S31603 Stainless Steel Plate UNS S31603 Stainless Steel Plate
316H SS Shim Sheet 316H SS Shim Sheet

SS 1.4401 Sheets Equivalent Material

Supplier Of Stainless Steel 316L Sheet In Mumbai, India, Get Free Quote For UNS S31603 Stainless Steel Plate, Equivalent Grades Of SS 1.4401 Sheets.
STANDARD BS WERKSTOFF NR. GOST UNS AFNOR JIS EN
SS 316L 316S13 1.4435 03Ch17N14M2 S31603 Z3CND18‐14‐03 SUS 316L X2CrNiMo18-14-3
SS 316H - - - S31609 - - -

Long way of diamond runs parallel to length of AISI 316L Shim Sheet

Style Designation Wt. per Sq. Ft. in Lbs. Size in Inches Wt. Per Sheet
3/4__9 1.95 48 x 96 62.4
1/2__13 1.78 48 x 96 56.9
1/2__16 0.86 48 x 96 27.5
1/2__18 0.69 48 x 96 22.1
1-1/2__9 1.31 48 x 96 41.9
3/4__13 0.86 48 x 96 27.5
3/4__16 0.57 48 x 96 18.2
3/4__18 0.46 48 x 96 14.7
1-1/2__13 0.65 48 x 96 20.8

Stainless Steel 316L Sheets, Plates & Coils Finishes As Per ASTM A240M

Surface Finish Definition Application
2B Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. Medical equipment, Food industry, Construction material, Kitchen utensils.
BA Those processed with bright heat treatment after cold rolling. Kitchen utensils, Electric equipment, Building construction.
NO.3 Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. Kitchen utensils, Building construction.
NO.4 Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. Kitchen utensils, Building construction, Medical equipment.
HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. Building Construction.
NO.1 The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. Chemical tank, pipe

ASME SA240 Stainless Steel 316L Plate Density

Plate Type Density
Stainless Steel 316L Plate 8.0 g/cm3

ASTM A240 Stainless Steel 316L Plate Melting Range

Plate Type Melting Point
Stainless Steel 316L Plate 1399 °C (2550 °F)

Perforated Stainless Steel Sheet 316L

Hole Dia mm Hole Centres mm O/A Finish Tck mm Full Sheet Size mm
0.75 1.5 23% 2B 0.6 2000 x 1000
1 2 23% 2B 1.0 2000 x 1000
1.5 2.6 30% 2B 1.0 2000 x 1000
2 3.5 30% 2B 1.0 2000 x 1000
2 3.5 30% 2B 1.0 2000 x 1000
3 5 33% 2B 1.0 2000 x 1000
4 5.6 46% 2B 1.0 2000 x 1000
5 8 35% 2B 1.0 2000 x 1000
6 8 51% 2B 1.0 2000 x 1000
8 10 58% 2B 1,0 2000 x 1000

Plain & Polished 316L Stainless Steel Sheet

PRODUCT FINISH THICKNESS MM MAX SHEET SIZE MM
Grade 316L Plain 2B 0.9 2000 x 1000
Bright 0.9 2000 x 1000
Brushed Finish 0.9, 1.2 2000 x 1000, 2500 x 1250
Rimex Super Mirror 0.8, 1.2 2400 x 1200, 2500 x 1250
Embossed 0.8, 1.0 2500 x 1250

ASTM A240 Stainless Steel 316L Plate Metric Dimensions

Plate Surface finish Thickness (mm) Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 0.25–8.0 2032
2D – Cold rolled, heat treated, pickled plate 0.4–6.35 1524
2E – Cold rolled, heat treated, mechanically descaled plate 0.4–8.0 2032
2R – Cold rolled, bright annealed plate 0.25–3.5 1524
2H – Work hardened plate 0.4–6.35 1524
Polished, brushed plate 0.5–4.0 1524

ASTM A240 Stainless Steel 316L Plate Imperial Dimensions

Plate Surface finish Gauge (in) Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 10–24 72*
2D – Cold rolled, heat treated, pickled plate 12–24 60
BA Mexinox only 18–28 48
Polished plate (not brushed) 11–24 60
Temper rolled plate Mexinox only 13–29 48

Stainless Steel Sheets -Type 316L | No. 2B Finish — Cold Rolled, Annealed

SS 316L Sheets Dimension Sizes & Weight Chart SS 316L Gauge, Width and Length Weight
Lbs. per Sq Ft.
Est. Wt. per Sheets
7GA (.1874")
316L SS Sheets 48 x 96 7.871 251.9
AMS 5507 Sheets 48 x 120 7.871 314.8
Sae Ams 5507 Sheets 48 x 144 7.871 377.8
10GA (.135”)
Ams 5507 SS Sheets 36 x 120 5.670 170.1
316L Ams 5507 Sheets 48 x 96 5.670 181.4
Aisi 316L Ams 5507 Sheets 48 x 120 5.670 226.8
Cres 316L Ams 5507 Sheets 60 x 120*
5.670 283.5
Aisi SS 316L Sheets 60 x 144*
5.670 340.2
316L SS Sheets 72 x 120* 5.670 340.2
11 GA (.120")
SS 316L Stainless Sheets 36 x 96 5.040 121.0
316L Stainless Sheets 36 x 120 5.040 151.2
Aisi 316L Sheets 36 x 144 5.040 181.4
Alloy 316L Sheets 48 x 96 5.040 161.3
316L SS Sheets 48 x 120 5.040 201.6
Aisi 316L SS Sheets 48 x 144 5.040 241.9
Alloy 316L Sheets 60 x 120 5.040 252.0
316L SS Sheets 60 x 144 5.040 302.4
316L Ams 5507 Sheets 72 x 120* 5.040 302.4
316L SS Sheets 72 x 144* 5.040 362.9
12 Ga. (.105")
316L SS Sheets 36 x 96 4.410 105.8
AMS 5507 Sheets 36 x 120 4.410 132.3
Sae Ams 5507 Sheets 36 x 144 4.410 158.8
Ams 5507 SS Sheets 42 x 120 4.410 154.4
316L Ams 5507 Sheets 48 x 96 4.410 141.1
Aisi 316L Ams 5507 Sheets 48 x 120 4.410 176.4
Cres 316L Ams 5507 Sheets 48 x 144 4.410 211.7
Aisi SS 316L Sheets 60 x 96 4.410 176.4
316L SS Sheets 60 x 120 4.410 220.5
SS 316L Stainless Sheets 60 x 144 4.410 264.6
316L Stainless Sheets 72 x 120* 4.410 264.6
Aisi 316L Sheets 72 x 144 4.410 317.5
13 Ga (.090")
Alloy 316L Sheets 36 x 96 3.780 90.72
316L SS Sheets 36 x 120 3.780 113.4
Aisi 316L SS Sheets 48 x 120 3.780 151.2
14 Ga. (.075")
Alloy 316L Sheets 30 x 120 3.150 78.75
316L SS Sheets 36 x 96 3.150 75.60
316L Ams 5507 Sheets 36 x 120 3.150 94.50
316L SS Sheets 36 x 144 3.150 113.4
316L SS Sheets 42 x 120 3.150 110.3
AMS 5507 Sheets 42 x 144 3.150 132.3
Sae Ams 5507 Sheets 48 x 96 3.150 100.8
Ams 5507 SS Sheets 48 x 120 3.150 126.0
316L Ams 5507 Sheets 48 x 144 3.150 151.2
Aisi 316L Ams 5507 Sheets 60 x 120 3.150 157.5
Cres 316L Ams 5507 Sheets 60 x 144 3.150 189.0
Aisi SS 316L Sheets 72 x 120 3.150 189.0
316L SS Sheets 72 x 144 3.150 226.8
16 Ga. (.060")
SS 316L Stainless Sheets 30 x 96 2.520 50.40
316L Stainless Sheets 30 x 120 2.520 63.00
Aisi 316L Sheets 36 x 96 2.520 60.48
Alloy 316L Sheets 36 x 120 2.520 75.60
316L SS Sheets 36 x 144 2.520 90.72
Aisi 316L SS Sheets 42 x 120 2.520 88.20
Alloy 316L Sheets 48 x 96 2.520 80.64
316L SS Sheets 48 x 120 2.520 100.8
316L Ams 5507 Sheets 48 x 144 2.520 121.0
316L SS Sheets 60 x 96 2.520 100.8
AMS 5507 Sheets 60 x 120 2.520 126.0
Sae Ams 5507 Sheets 60 x 144 2.520 151.2
18 Ga. (.048")
Ams 5507 SS Sheets 30 x 96 2.016 40.32
316L Ams 5507 Sheets 30 x 120 2.016 50.40
Aisi 316L Ams 5507 Sheets 36 x 96 2.016 48.38
Cres 316L Ams 5507 Sheets 36 x 120 2.016 60.48
Aisi SS 316L Sheets 36 x 144 2.016 72.58
316L SS Sheets 42 x 120 2.016 70.56
SS 316L Stainless Sheets 48 x 96 2.016 64.51
316L Stainless Sheets 48 x 120 2.016 80.64
Aisi 316L Sheets 48 x 144 2.016 96.77
Alloy 316L Sheets 60 x 120 2.016 100.8
316L SS Sheets 60 x 144 2.016 121.0
19 Ga. (.042")
Alloy 316L Sheets 36 x 120 1.764 52.92
20 Ga. (.036")
316L Ams 5507 Sheets 30 x 96 1.512 30.24
Aisi 316L SS Sheets 30 x 120 1.512 37.80
316L SS Sheets 36 x 96 1.512 36.29
AMS 5507 Sheets 36 x 120 1.512 45.36
Sae Ams 5507 Sheets 36 x 144 1.512 54.43
42 x 120 1.512 52.92
Ams 5507 SS Sheets 48 x 96 1.512 48.38
316L Ams 5507 Sheets 48 x 120 1.512 60.48
Aisi 316L Ams 5507 Sheets 48 x 144 1.512 72.58
22 Ga. (.030")
Aisi SS 316L Sheets 30 x 96 1.260 25.20
316L SS Sheets 30 x 120 1.260 61.50
36 x 96 1.260 30.24
SS 316L Stainless Sheets 36 x 120 1.260 37.80
316L Stainless Sheets 36 x 144 1.260 45.36
Aisi 316L Sheets 48 x 96 1.260 40.32
Alloy 316L Sheets 48 x 120 1.260 50.40
24 Ga. (.024")
Aisi 316L SS Sheets 30 x 96 1.008 20.16
Alloy 316L Sheets 30 x 120 1.008 25.20
316L SS Sheets 36 x 96 1.008 24.19
316L Ams 5507 Sheets 36 x 120 1.008 30.24
Cres 316L Ams 5507 Sheets 48 x 96 1.008 32.26
316L SS Sheets 48 x 120 1.008 40.32
26 Ga. (.018")
316L SS Sheets 30 x 96 .7560 15.12
AMS 5507 Sheets 30 x 120 .7560 18.90
Sae Ams 5507 Sheets 36 x 96 .7560 18.14
Aisi 316L Ams 5507 Sheets 36 x 120 .7560 22.68
Ams 5507 SS Sheets 48 x 96 .7560 24.1
316L Ams 5507 Sheets 48 x 120 .7560 30.24
28 Ga. (.015")
Cres 316L Ams 5507 Sheets 36 x 96 .630 15.12
Aisi SS 316L Sheets 36 x 120 .630 18.90

Type 316L – Flattened | Long Way Of Diamond Runs Parallel To Length Of Sheet

Style Designation Size in Inches Wt. per Sq. Ft. in Lbs. Wt. Per Sheet
Expanded Aisi 316L Ams 5648 Sheet 3/4__9 48 x 96 1.95 62.4
Expanded 316L Ams 5648 Sheet 1/2__13 48 x 96 1.78 56.9
Expanded Stainless Steel 316L / 316L Sheet 1/2__16 48 x 96 0.86 27.5
Expanded Sae Ams 5507 Sheet 1/2__18 48 x 96 0.69 22.1
Expanded Stainless Steel 316L Sheet 1-1/2__9 48 x 96 1.31 41.9
Expanded AMS 5507 Sheet 3/4__13 48 x 96 0.86 27.5
Expanded 316L Ams 5507 Sheet 3/4__16 48 x 96 0.57 18.2
Expanded Aisi 316L Ams 5507 Sheet 3/4__18 48 x 96 0.46 14.7
Expanded Ams 5507 Stainless Steel Sheet 1-1/2__13 48 x 96 0.65 20.8

SS 316L Plate Weight Per Unit

ASTM A240 SS 316L Cold Rolled Plate Size (mm) Weight per
plate (Kg)
Size(mm) Weight per 
plate (Kg)
SS 316L Plate 4000 x 2000 x 2.0 136.0 3000 x 1500 x 5.0 191.0
SS 316L Plate 4000 x 2000 x 3.0 204.0 4000 x 2000 x 5.0 340.0
SS 316L Plate 2500 x 1250 x 4.0 106.0 2500 x 1250 x 6.0 159.0
SS 316L Plate 3000 x 1500 x 4.0 153.0 3000 x 1500 x 6.0 230.0
SS 316L Plate 4000 x 2000 x 4.0 272.0 4000 x 2000 x 6.0 408.0
SS 316L Plate 2500 x 1250 x 5.0 133.0
CPP Plate 1D Finish ASTM A240, ASME SA240: 316L | EN 10088-2: 1.4301, 1.4307, 1.4404, 1.4404 Plates
Size 
(mm)
Weight per
plate (kg)
Size  
(mm)
Weight per
plate (kg)
2000 x 1000 x 3.0 51.0 4000 x 2000 x 6.0 408.0
2500 x 1250 x 3.0 79.7 2500 x 1250 x 8.0 213.0
3000 x 1500 x 3.0 115.0 3000 x 1500 x 8.0 306.0
2000 x 1000 x 4.0 68.0 4000 x 2000 x 8.0 544.0
2500 x 1250 x 4.0 106.0 2500 x 1250 x 10.0 266.0
3000 x 1500 x 4.0 153.0 3000 x 1500 x 10.0 383.0
2000 x 1000 x 5.0 85.0 4000 x 1500 x 10.0 510.0
2500 x 1250 x 5.0 133.0 4000 x 2000 x 10.0 680.0
3000 x 1500 x 5.0 191.0 2500 x 1250 x 12.0 319.0
4000 x 2000 x 5.0 340.0 3000 x 1500 x 12.0 459.0
2000 x 1000 x 6.0 102.0 4000 x 1500 x 12.0 612.0
2500 x 1250 x 6.0 159.0 4000 x 2000 x 12.0 816.0
3000 x 1500 x 6.0 230.0
Stainless Steel Treadplate AISI 316L, Dual Certified to DIN 59220 (T) & ASTM A793/96 Pattern 1
Thickness on base (mm) Unit Weight per plate (kg)
3000 x1000 x3.0 78.0
3000 x1250 x4.5 143.0
3000 x1250 x6.0 180.0
3000 x1250 x8.0 210.0

SS UNS S31603 Plate Sizes

Material Size Thickness Specification Make
SS 316L Plate / SS 316LSheet 1250 mm x 2500 mm 0.1mm to 12 mm Thk IS, BS, ASTM, UNS Indian, European and Japanese origin
1000 mm x 2000 mm
1220 mm x 2440 mm (4' x 8')
1500 mm x 3000 mm
2000 mm x 2000 mm
2000 mm x 4000 mm

316L Stainless Steel Sheet Gauges

NOMINAL DECIMAL STANDARD VARIANCE FROM
SHEET METAL GAUGE (APPROXIMATE INCHES) NOMINAL DECIMAL  (+/- INCHES)
7 0.1793 0.0080
8 0.1644 0.0080
9 0.1495 0.0080
10 0.1345 0.0070
11 0.1196 0.0050
12 0.1046 0.0050
13 0.0897 0.0050
14 0.0747 0.0040
15 0.0673 0.0040
16 0.0598 0.0030
17 0.0538 0.0030
18 0.0478 0.0030
19 0.0418 0.0030
20 0.0359 0.0030
21 0.0329 0.0025
22 0.0299 0.0020
23 0.0269 0.0020
24 0.0239 0.0020
25 0.0209 0.0015
26 0.0179 0.0015
28 0.0149 0.0010

316L Sheet & Plate Finish Cross Reference Chart

Grit RA RMS Trizact
30 250
40 200
60 145 150
80 71 125
100 61 69
120 52 58 A160
150 42 47 A130
180 30 34 A110
220 20 22 A90
240 15 17 A65
320 12 14 A45
500+ <3 <3 A35
1200 A20
1500 A10
Alloy Grade  Finish Thickness Width Weight Each Length
316L 2B 11 ga 48" 201.6 # 120"
316L 2B 14 ga 48" 126 # 120"
316L 2B 16 ga 48" 100.8 # 120"
316L 2B 18 GA 48" 80.6 # 120"
316L 2B 20 GA 48" 60.48 # 120"
Steel Sheet Type Sheet Thickness Sheet Length Sheet Width Sheet Specification
316L S/S HRAP REM .5000   RL RW ASTM A240 ASME SA240
316L S/S HRAP REM .2500   RL RW ASTM A240 ASME SA240
316L S/S PLATE HRAP REM .1875   RL RW ASTM A240 ASME SA240

Stainless Steel 316L Plate Processing

SS 316L Plate Processing Options
4 Dynamic Waterjet  Tables SS 316L plate can be waterjet cut from light gauge sheet metal thru 8″ thick Stainless 316L Plate.
2 Plasma Cutting Tables SS 316L plate can be plasma cut from 3/16″ thick thru 6.25″ thick.
1 plate laser SS 316L sheet gauges thru 1-1/8″ thick SS 316L plate can be laser cut.
4 Kasto Plate Saws SS 316L plate or bar from 1/2″ thick thru 22″ thick SS 316L can be Kasto saw cut.
3 Plate Shears SS 316L plate thru 3/4″ thick can be shear cut to size.
Gauer Processing SS 316L sheared and edged bar can be gauer processed from 3/16″ thick thru 5/8″ thick up to 8″ wide.
Stainless 316L Plate Leveling In house plate leveling of coil from 13 gauge stainless sheet thru 3/8″ Stainless 316L Plate coil, thru 78.75″ wide (2 meter)
Machine Cutting SS 316L rings and discs can be machine cut from 1/2″ thick thru 12″ thick, up to 42″ in diameter