Contact US For Stainless Steel 410 Plates, SS UNS S41000 Sheets Instant Delivery.

Stainless Steel 410 Sheet is a martensitic grade of steel plate. The material is corrosion resistant to general corrosive services. Stancor Alloys is a leading manufacturer of the Stainless Steel 410 Plates in different types, shapes and dimensions. The material is composed of iron, carbon, chromium, nickel, manganese, silicon, phosphorus and sulfur. SS 410 Sheets have 11.5% chromium in the composition which provides the corrosion resistance properties. To improve the corrosion resistance, the SS 410 Circle and other forms of sheets could be hardened, tempered and polished. Quenching and tempering of the material can harden the SS UNS S41000 Plates. All types of martensitic steels need to be finally heat treated after production. They are suitable for low temperatures to mild temperatures because they tend to lose the strength and at elevated temperatures and at cryogenic temperatures.

The SS 410 Coils are another form of the sheets that can be used in mild temperature applications. The AISI 410 Plate can have minimum yield strength up to 1005MPa if annealed and at 204 degrees Celsius and minimum yield strength of 1475MPa at the same temperature range. However, the SUS 410 Plate drops in strength at high temperatures such as 650 degrees Celsius with minimum yield strength of 270MPa and minimum tensile strength of 300MPa. The 410 Stainless Steel Hot Rolled Plates and cold rolled plates are available in the market. This martensitic grade of steel is used to make bolts, screws, bushings and nuts due to its high toughness. The ASTM A240 Stainless Steel 410 Shim is used in high stress environments where the shim has to bear stress from two sides with two components. The petroleum fractionating structures, mine ladder rungs, gas turbines, shafts, valves and pumps are some other applications where the Sheets Stainless Steel 410 Cold Rolled Plates are used. Please feel free to contact us for further product information and pricing.

SS 410 Sheets Specification And Grade

Specifications ASTM A240 / ASME SA240
Length 2000 milimeter, 2440 milimeter, 3000 milimeter, 5800 milimeter, 6000 milimeter, etc
Thickness 4 milimeter - 100 milimeter
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Width
1000 milimeter, 1219 milimeter, 1500 milimeter, 1800 milimeter, 2000 milimeter, 2500 milimeter, 3000 milimeter, 3500 milimeter, etc
Form Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc

Standards Dimensions Of SS 410 Circle, Buy 410 Stainless Steel 2B Plate At Low Price, SS UNS S41000 Plates Specification.

AISI 410 Plate Chemical Structure

Grade S C Cr Mn N Si Ni P Mo
SS 410 0.030 max 0.15 max 11.5 – 13.5 1.0 max 1.0 max 0.50 max 0.040 max

Stainless Steel 410 Plates Mechanical Behaviour

Stainless Steel 410 Shim Sheets Range, Check SS 410 Coils Chemical Composition, AISI 410 Plate Mechanical properties, Call Now to Get 410 Stainless Steel Plates Free sample.

Grade Hardness (Brinell) MAX Tensile Strength Elongation Yield Strength Hardness (Rockwell B) MAX
410 217 65 (450) 20 30 (205) 96

Basic Types Of Stainless Steel 410 Sheet

Stainless Steel 410 Plates Stainless Steel 410 Plates
SS 410 Sheets SS 410 Sheets
SS 410 Circle SS 410 Circle
410 Stainless Steel 2B Plate 410 Stainless Steel 2B Plate
SS UNS S41000 Plates SS UNS S41000 Plates
Stainless Steel 410 Shim Sheets Stainless Steel 410 Shim Sheets
SS 410 Coils SS 410 Coils
AISI 410 Plate AISI 410 Plate
410 Stainless Steel Plates 410 Stainless Steel Plates
SUS 410 Plate SUS 410 Plate
410 Stainless Steel Hot Rolled Plates 410 Stainless Steel Hot Rolled Plates
ASTM A240 Stainless Steel 410 Shim Sheets ASTM A240 Stainless Steel 410 Shim Sheets

SS UNS S41000 Plates Equivalent Grades

Accept all small/ Large Orders SUS 410 Plate, Weight Chart Of 410 Stainless Steel Hot Rolled Plates, View ASTM A240 Stainless Steel 410 Shim Sheets Grades Equivalent.
STANDARD BS WERKSTOFF NR. GOST UNS AFNOR JIS EN
SS 410 410S21 1.4006 S41000 SUS 410 X12Cr13

410 Stainless Steel Plates Physical Properties

Buy Stainless Steel 410 Cold Rolled Plates, SS 410 Perforated Sheets Certified & Tested Materials, We provide Multiple Payment Options Of SS Grade 410 Polished Plates, Physical Properties Of Stainless Steel 410 Sheet.
Grade Specific Heat 0-100°C
(J/kg.K)
Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion
(μm/m/°C)
Thermal Conductivity
(W/m.K)
Electrical Resistivity (nΩ.m)
0-315°C 0-100°C 0-538°C at 500°C at 100°C
410 460 7800 200 11 9.9 11.5 28.7 24.9 570

Stainless Steel 410 Sheets, Plates & Coils Finishes As Per ASTM A240M

Surface Finish Definition Application
2B Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. Medical equipment, Food industry, Construction material, Kitchen utensils.
BA Those processed with bright heat treatment after cold rolling. Kitchen utensils, Electric equipment, Building construction.
NO.3 Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. Kitchen utensils, Building construction.
NO.4 Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. Kitchen utensils, Building construction, Medical equipment.
HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. Building Construction.
NO.1 The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. Chemical tank, pipe

ASME SA240 Stainless Steel 410 Plate Density

Plate Type Density
Stainless Steel 410 Plate 0.276 lb/in3

ASTM A240 Stainless Steel 410 Plate Melting Range

Plate Type Melting Point
Stainless Steel 410 Plate 2700-2790°F 1482-1532°C

410 Stainless Steel Sheet Tolerances

Gauge LB/Sq. Ft. LB/Sq In. Gauge Tolerance
72″ Wide 96″ Wide
3/16 0.1875 8.579 0.05958 +.045″ -.010″ +.050″ -.010″
7/32 0.2187 9.870 0.06854
1/4 0.2500 11.162 0.07750
5/16 0.3125 13.746 0.09546
3/8 0.3750 16.496 0.11456 +.055″ -.010″ +.060″ -.010″
7/16 0.4375 19.080 0.13250
1/2 0.5000 21.633 0.15044
9/16 0.5625 24.247 0.16838
5/8 0.6250 26.831 0.18633
11/16 0.6875 29.415 0.20427
3/4 0.7500 32.123 0.22308 +.060″ -.010″ +.065″ -.010″
13/16 0.8125 34.707 0.24102
7/8 0.8750 37.291 0.25897
15/16 0.9375 39.875 0.27691
1 1.0000 42.665 0.29628 +.070″ -.010″ +.075 -.010″
1-1/8 1.1250 47.833 0.33217
1-1/4 1.2500 53.001 0.36806
1-3/8 1.3750 58.169 0.40395
1-1/2 1.5000 63.337 0.43984
1-3/4 1.7500 73.672 0.51161
2 2.0000 84.008 0.58339 +.125″ -.010″ +.150″ -.010″
2-1/8 2.1250 89.610 0.62229
2-1/4 2.2500 94.777 0.65817
2-1/2 2.5000 105.113 0.72995
2-3/4 2.7500 115.449 0.80173
3 3.0000 126.301 0.87709 +.150″ -.010″ +.160″ -.010″
3-1/2 3.5000 146.972 1.02064
4 4.0000 168.264 1.16850 +.180″ -.010″ +.200″ -.010

410 Stainless Steel Sheet Gauges


NOMINAL DECIMAL
STANDARD VARIANCE FROM
SHEET METAL GAUGE (APPROXIMATE INCHES) NOMINAL DECIMAL  (+/- INCHES)
7 0.1793 0.0080
8 0.1644 0.0080
9 0.1495 0.0080
10 0.1345 0.0070
11 0.1196 0.0050
12 0.1046 0.0050
13 0.0897 0.0050
14 0.0747 0.0040
15 0.0673 0.0040
16 0.0598 0.0030
17 0.0538 0.0030
18 0.0478 0.0030
19 0.0418 0.0030
20 0.0359 0.0030
21 0.0329 0.0025
22 0.0299 0.0020
23 0.0269 0.0020
24 0.0239 0.0020
25 0.0209 0.0015
26 0.0179 0.0015
28 0.0149 0.0010

SS UNS S41000 Plate Sizes

Thickness (in) Thickness (mm) Max Width (in) Max Width (mm) Weight (Lbs per Feet) Weight (Kilos per m2)
0.187 4.7498 24 609.6 7.5398 36.8168
0.165 4.191 24 609.6 6.6528 32.4856
0.125 3.175 24 609.6 5.04 24.6103
0.105 2.667 24 609.6 4.2336 20.6727
0.09 2.286 24 609.6 3.6288 17.7194
0.062 1.5748 24 609.6 2.4998 12.2065
0.059 1.4986 24 609.6 2.3789 11.6162
0.055 1.397 24 609.6 2.2176 10.8285
0.05 1.27 24 609.6 2.016 9.8441
0.045 1.143 24 609.6 1.8144 8.8597
0.042 1.0668 24 609.6 1.6934 8.2689
0.04 1.016 24 609.6 1.6128 7.8753
0.035 0.889 24 609.6 1.4112 6.8909
0.032 0.8128 24 609.6 1.2902 6.3
0.03 0.762 24 609.6 1.2096 5.9065
0.025 0.635 24 609.6 1.008 4.9221
0.022 0.5588 24 609.6 0.887 4.3312
0.02 0.508 24 609.6 0.8064 3.9377
0.018 0.4572 24 609.6 0.7258 3.5441
0.016 0.4064 24 609.6 0.6451 3.15
0.015 0.381 24 609.6 0.6048 2.9532
0.014 0.3556 24 609.6 0.5645 2.7565
0.012 0.3048 24 609.6 0.4838 2.3624
0.01 0.254 24 609.6 0.4032 1.9688
0.008 0.2032 12 304.8 0.3226 1.5753
0.006 0.1524 12 304.8 0.2419 1.1812
0.005 0.127 12 304.8 0.2016 0.9844

SS 410 Plate Weight Per Unit

Thickness Plate Weight per Unit Area Density
3/16 inches 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 inches 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 inches 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 inches 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 inches 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 inches 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 inches 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 inches 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 inches 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 inches 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 inches 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 inches 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 inches 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 inches 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 inches 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 inches 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

410 Stainless Steel Diamond Sheet Weight Chart

Gauge Pattern Sizes Available: Wt per Sheet Grades Available: Pattern
1/8
6.149/# SQF
48 x 96 197
48 x 120 246 316/316/L/410
48 x 144 295
3/16
8.698/# SQF
36 x 96 209 304 Pattern B
36 x 120 261 304L Pattern B
36 x 144 313 316/L/410 Pattern B
48 x 96 278
48 x 120 348
48 x 144 418
60 x 96 348
60 x 120 435
60 x 144 522
60 x 240 870
1/4
11.247/# SQF
36 x 96 270 304 Pattern B
36 x 120 337 304L Pattern B
36 x 144 405 316/L/410 Pattern B
48 x 96 360
48 x 120 450
48 x 144 540
48 x 240 900
60 x 96 450
60 x 120 562
60 x 144 675
60 x 240 1125
3/8
16.600/# SQF
48 x 96 531 304 Pattern B
48 x 120 664 304L Pattern B
48 x 144 797 316/L/410 Pattern B

Thicknesses For Alloy 410 Stainless Steel Sheet

3/16″ 4.8mm
1/4″ 6.3mm
3/8″ 9.5mm
1/2″ 12.7mm
5/8″ 15.9mm
3/4″ 19mm
1″ 25.4mm
1 1/4″ 31.8mm
1 1/2″ 38.1mm
1 3/4″ 44.5mm
2″ 50.8mm

ASTM A240 Stainless Steel 410 Plate Metric Dimensions

Plate Surface finish Thickness (mm) Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 0.25–8.0 2032
2D – Cold rolled, heat treated, pickled plate 0.4–6.35 1524
2E – Cold rolled, heat treated, mechanically descaled plate 0.4–8.0 2032
2R – Cold rolled, bright annealed plate 0.25–3.5 1524
2H – Work hardened plate 0.4–6.35 1524
Polished, brushed plate 0.5–4.0 1524

Imperial Dimensions of ASTM A240 Stainless Steel 410 Plate

Plate Surface finish Gauge (in) Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 10–24 72*
2D – Cold rolled, heat treated, pickled plate 12–24 60
BA Mexinox only 18–28 48
Polished plate (not brushed) 11–24 60
Temper rolled plate Mexinox only 13–29 48

Stainless Steel Sheets -Type 410 | No. 2B Finish — Cold Rolled, Annealed

Stainless Steel Gauge, Width and Length Weight
Lbs. per Sq Ft.
Est. Wt. per Sheet
7GA (.1874")
48 x 96 7.871 251.9
48 x 120 7.871 314.8
48 x 144 7.871 377.8
10GA (.135”)
36 x 120 5.670 170.1
48 x 96 5.670 181.4
48 x 120 5.670 226.8
60 x 120*
5.670 283.5
60 x 144*
5.670 340.2
72 x 120* 5.670 340.2
11 GA (.120")
36 x 96 5.040 121.0
36 x 120 5.040 151.2
36 x 144 5.040 181.4
48 x 96 5.040 161.3
48 x 120 5.040 201.6
48 x 144 5.040 241.9
60 x 120 5.040 252.0
60 x 144 5.040 302.4
72 x 120* 5.040 302.4
72 x 144* 5.040 362.9
12 Ga. (.105")
36 x 96 4.410 105.8
36 x 120 4.410 132.3
36 x 144 4.410 158.8
42 x 120 4.410 154.4
48 x 96 4.410 141.1
48 x 120 4.410 176.4
48 x 144 4.410 211.7
60 x 96 4.410 176.4
60 x 120 4.410 220.5
60 x 144 4.410 264.6
72 x 120* 4.410 264.6
72 x 144 4.410 317.5
13 Ga (.090")
36 x 96 3.780 90.72
36 x 120 3.780 113.4
48 x 120 3.780 151.2
14 Ga. (.075")
30 x 120 3.150 78.75
36 x 96 3.150 75.60
36 x 120 3.150 94.50
36 x 144 3.150 113.4
42 x 120 3.150 110.3
42 x 144 3.150 132.3
48 x 96 3.150 100.8
48 x 120 3.150 126.0
48 x 144 3.150 151.2
60 x 120 3.150 157.5
60 x 144 3.150 189.0
72 x 120 3.150 189.0
72 x 144 3.150 226.8
16 Ga. (.060")
30 x 96 2.520 50.40
30 x 120 2.520 63.00
36 x 96 2.520 60.48
36 x 120 2.520 75.60
36 x 144 2.520 90.72
42 x 120 2.520 88.20
48 x 96 2.520 80.64
48 x 120 2.520 100.8
48 x 144 2.520 121.0
60 x 96 2.520 100.8
60 x 120 2.520 126.0
60 x 144 2.520 151.2
18 Ga. (.048")
30 x 96 2.016 40.32
30 x 120 2.016 50.40
36 x 96 2.016 48.38
36 x 120 2.016 60.48
36 x 144 2.016 72.58
42 x 120 2.016 70.56
48 x 96 2.016 64.51
48 x 120 2.016 80.64
48 x 144 2.016 96.77
60 x 120 2.016 100.8
60 x 144 2.016 121.0
19 Ga. (.042")
36 x 120 1.764 52.92
20 Ga. (.036")
30 x 96 1.512 30.24
30 x 120 1.512 37.80
36 x 96 1.512 36.29
36 x 120 1.512 45.36
36 x 144 1.512 54.43
42 x 120 1.512 52.92
48 x 96 1.512 48.38
48 x 120 1.512 60.48
48 x 144 1.512 72.58
22 Ga. (.030")
30 x 96 1.260 25.20
30 x 120 1.260 61.50
36 x 96 1.260 30.24
36 x 120 1.260 37.80
36 x 144 1.260 45.36
48 x 96 1.260 40.32
48 x 120 1.260 50.40
24 Ga. (.024")
30 x 96 1.008 20.16
30 x 120 1.008 25.20
36 x 96 1.008 24.19
36 x 120 1.008 30.24
48 x 96 1.008 32.26
48 x 120 1.008 40.32
26 Ga. (.018")
30 x 96 .7560 15.12
30 x 120 .7560 18.90
36 x 96 .7560 18.14
36 x 120 .7560 22.68
48 x 96 .7560 24.1
48 x 120 .7560 30.24
28 Ga. (.015")
36 x 96 .630 15.12
36 x 120 .630 18.90

Type 410 – Flattened | Long Way Of Diamond Runs Parallel To Length Of Sheet

Style Designation Size in Inches Wt. per Sq. Ft. in Lbs. Wt. Per Sheet
3/4__9 48 x 96 1.95 62.4
1/2__13 48 x 96 1.78 56.9
1/2__16 48 x 96 0.86 27.5
1/2__18 48 x 96 0.69 22.1
1-1/2__9 48 x 96 1.31 41.9
3/4__13 48 x 96 0.86 27.5
3/4__16 48 x 96 0.57 18.2
3/4__18 48 x 96 0.46 14.7
1-1/2__13 48 x 96 0.65 20.8

Perforated Stainless Steel Sheet 410

Hole Dia mm Hole Centres mm O/A Finish Tck mm Full Sheet Size mm
0.75 1.5 23% 2B 0.6 2000 x 1000
1 2 23% 2B 1.0 2000 x 1000
1.5 2.6 30% 2B 1.0 2000 x 1000
2 3.5 30% 2B 1.0 2000 x 1000
2 3.5 30% 2B 1.0 2000 x 1000
3 5 33% 2B 1.0 2000 x 1000
4 5.6 46% 2B 1.0 2000 x 1000
5 8 35% 2B 1.0 2000 x 1000
6 8 51% 2B 1.0 2000 x 1000
8 10 58% 2B 1,0 2000 x 1000

Plain & Polished 410 Stainless Steel Sheet

PRODUCT FINISH THICKNESS MM MAX SHEET SIZE MM
Grade 410 Plain 2B 0.9 2000 x 1000
Bright 0.9 2000 x 1000
Brushed Finish 0.9, 1.2 2000 x 1000, 2500 x 1250
Rimex Super Mirror 0.8, 1.2 2400 x 1200, 2500 x 1250
Embossed 0.8, 1.0 2500 x 1250
 
410 Stainless Polished Steel Sheet Overview – Sizes, Grades & Finishes
Thickness Range of Stainless Steel 410 Polished Sheet 24 gauge thru 7 gauge stainless steel Sheet
Common Polished 410 Stainless Steel Sheet Finishes #4 Finish – #8 Mirror Finish
Specialty Polished 410 Stainless Steel Sheet Finishes Other stainless finishes that can be provided per customer request include a #6 finish or a #7 finish. Polished finished Sheet can be ordered to a specified RA range.
300 Series Stainless Sheet Finishes Inventory 304 & 316L in stocked. Other 300 series stainless grades can be polished per customer request. Most stainless or duplex stainless grades Sheet can be polished per request.
400 Series Stainless Sheet Finishes 430 BA is inventoried. Other grades Sheet can also be provided with a BA finish. Mill minimums may apply.
Process/Equipment Product Size Range General information
Polishing All product shapes Light Gauge Sheet through Heavy Gauge Plate #4 Polish, #6 Polish, #8 Mirror, or per customer specification or sample
Blanchard Grinding Plate All Plate Sizes All plate inventory can be cut to size, and then ground to your tolerance and flatness specifications.
Gauer Processing Plate We offer Gauer processing for size ranges up to 5/8″ thick, 8″ wide, and 20′ length
Stainless steel sheared and edged bar can be gauer processed from 3/16″ thick thru 5/8″ thick up to 8″ wide.
Tolerances vary by grade and thickness
Sheet leveling Sheet 26 gauge to 7 gauge, 24″ length to 92″ length Coil Widths available = 36″, 48″, 60″, 72″
Plate Leveling Plate 3/16″ through 3/8″ thickness, 24″ though 380″ length, up to 78″ wide
In house plate leveling of coil from 13 gauge stainless sheet thru 3/8″ stainless plate coil, thru 78.75″ wide (2 meter)
Coil Widths available = 36″, 48″, 60″, 72″

SS UNS S41000 Sheets Possible Alternative Grades

Grade Reasons for choosing the grade
416 High machinability is required, and the lower corrosion resistance of 416 is acceptable.
420 A higher hardened strength or hardness than can be obtained from 410 is needed.
440C A higher hardened strength or hardness than can be obtained even from 420 is needed

Stainless Steel 410 Plate Processing

Equipment Size Range Standard Internal Tolerances
(Inch)
Dynamic Waterjet 20 Gauge sheets through 8 inch thickness range,  Our two largest table sizes are:  124″x 241″ and 78.8” X 305.5” Part tolerances of ±.030” is standard.  Tolerances of ±.005” can be provided.  Tolerances may vary depending on thickness
Plasma Up to 6.25″ thickness,  Plasma Table Size = 10ft X 65ft.
410 Stainless steel Sheet can be plasma cut from 3/16″ thick thru 6.25″ thick.
Varies by thickness. State of the art equipment enables significantly better tolerances than older plasma technologies.
Saw Cutting (Kasto Saws, Hem Saws, and Abrasive saws) 3/8″ to 26″ thickness range.We can saw cut stainless steel Sheet up to 280″ length
410 Stainless steel Sheet or bar from 1/2″ thick thru 22″ thick stainless steel can be Kasto saw cut.
+1/8″ is typical; tolerances may vary depending on grade or thickness., and equipment.
Laser .12″ to 1.25″ thickness range. Laser table size = 159″ X 720″ (13.25′ X 60′) ±0.01″ to ±0.035″ depending on gauge
Plate Shear 3/16″ to 3/4″ thickness range, Up to 240″ length
410 Stainless steel Sheet thru 3/4″ thick can be shear cut to size.
+1/8″, -0 is typical; Tolerances may vary depending on grade or thickness
Machine Cutting 410 Stainless steel rings and discs can be machine cut from 1/2″ thick thru 12″ thick, up to 42″ in diameter +1/32″, -1/32″ is typical.  Tolerances may vary depending on grade or thickness
4 Dynamic Waterjet  Tables 410 Stainless steel Sheet can be waterjet cut from light gauge sheet metal thru 8″thick 410 stain